LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm ARC-014 — WARN Teach pendant is disabled

FANUC ARC-014 (“WARN Teach pendant is disabled”): The weld enable or a wire inch hardkey was pressed with the teach pendant enable switch First check: Check if weld controler is functioning correctly, or powered on.

Updated 2026-09-17 · LogrobotLM reference

Description

The weld enable or a wire inch hardkey was pressed with the teach pendant enable switch

Remedy

Check if weld controler is functioning correctly, or powered on.

Related codes

ARC-012STOPL Wire stick reset(s) failedARC-013STOPL Arc Start failedARC-015WARN Press shift with this keyARC-016STOPL Weld by Shift FWD is disabled

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →