LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm ARC-048 — WARN Auto AI/O setup is unsupported

FANUC ARC-048 (“WARN Auto AI/O setup is unsupported”): Auto AI/O setup for the mounted I/O module is not supported. First check: Verify mounted I/O module and set system variables of $AWEPRR[] in system variable screen manually if need.

Updated 2026-09-17 · LogrobotLM reference

Description

Auto AI/O setup for the mounted I/O module is not supported. So parameters are not set automatically.

Remedy

Verify mounted I/O module and set system variables of $AWEPRR[] in system variable screen manually if need.

Related codes

ARC-046WARN Weld EQ communication errorARC-047WARN Not allowed during a weldARC-049WARN Process … switch to … failedARC-050WARN Process … NOT found

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →