LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm BELL-062 — PAUS HOLD active

FANUC BELL-062 (“PAUS HOLD active”): A HOLD signal, either from the UOP or the teach pendant, has been activated. First check: Remove the HOLD condition

Updated 2026-08-29 · LogrobotLM reference

Description

A HOLD signal, either from the UOP or the teach pendant, has been activated.

Remedy · Remède

Remove the HOLD condition

Frequently asked · Questions fréquentes

What does FANUC alarm BELL-062 mean?
FANUC BELL-062 (“PAUS HOLD active”): A HOLD signal, either from the UOP or the teach pendant, has been activated.
How do you troubleshoot FANUC alarm BELL-062?
Remove the HOLD condition

Related codes / Codes liés

BELL-060PAUS Fence open during productionBELL-061PAUS UOP immediate stop detectedBELL-063PAUS PC serial interface faultBELL-064PAUS Overcurrent occurred

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →