FANUC Alarm DNET-080 — ERR_STOP_C Loaded config too large
FANUC DNET-080 (“ERR_STOP_C Loaded config too large”): The previous I/O configuration contains too many modules, devices, or device definitions to be loaded. First check: Make sure you have the same memory configuration as the system on which the I/O configuration was saved.
Updated 2026-08-29 · LogrobotLM reference
Description
The previous I/O configuration contains too many modules, devices, or device definitions to be loaded.
Remedy · Remède
Make sure you have the same memory configuration as the system on which the I/O configuration was saved.
Frequently asked · Questions fréquentes
- What does FANUC alarm DNET-080 mean?
- FANUC DNET-080 (“ERR_STOP_C Loaded config too large”): The previous I/O configuration contains too many modules, devices, or device definitions to be loaded.
- How do you troubleshoot FANUC alarm DNET-080?
- Make sure you have the same memory configuration as the system on which the I/O configuration was saved.
Related codes / Codes liés
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →