LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm ELOG-009 — WARN call a service man

FANUC ELOG-009 (“WARN call a service man”): A system error has occurred. First check: Perform a cold start: 1.

Updated 2026-09-17 · LogrobotLM reference

Description

A system error has occurred.

Remedy

Perform a cold start: 1. Turn off the robot. 2. On the teach pendant, press and hold the SHIFT and RESET keys. 3. While still pressing the SHIFT and RESET keys, turn on the robot. If the error is not cleared, document the events that let to the error and call your FANUC Robotics technical representative.

Related codes

ELOG-011WARN Power off, if you want to recover.ELOG-012WARN A system error has been occurred.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →