FANUC Alarm FXTL-065 — Tray … in HOLD state

Manufacturer wording — Tray %d in HOLD state
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC FXTL-065 (“Tray … in HOLD state”): The tray is in a HOLD state because the PLC NOHLD bit is OFF. First check: Clear the HOLD condition from the PLC, and retry.

Updated 2026-09-17 · LogrobotLM reference

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →