LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm ISD-040 — Meter recovery time out (ISD…)

Manufacturer wording — Meter recovery time out (ISD%d)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC ISD-040 (“Meter recovery time out (ISD…)”): The minimum recovery pressure was not reached within the specified time in the ISD SETUP menu. First check: If the gap between the rods is not closed increase the recovery time, or increase the recovery speed.

Updated 2026-09-17 · LogrobotLM reference

Description

The minimum recovery pressure was not reached within the specified time in the ISD SETUP menu.

Remedy

If the gap between the rods is not closed increase the recovery time, or increase the recovery speed. If the gap is closed, check the pressure transducers, or check for leaks in the system.

Related codes

ISD-034Low pressure warn(disp-…) (ISD…)ISD-035Can not goto dispense mode (ISD…)ISD-041Enter gap recovery (ISD…)ISD-042Exit gap recovery (ISD…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →