LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm ISD-061 — Meter hydraulic not running (IPS…)

Manufacturer wording — Meter hydraulic not running (IPS%d)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC ISD-061 (“Meter hydraulic not running (IPS…)”): Meter hydraulic running input signal is OFF. First check: Make sure meter hydraulics are turned ON and the input signal is ON.

Updated 2026-09-17 · LogrobotLM reference

Description

Meter hydraulic running input signal is OFF.

Remedy

Make sure meter hydraulics are turned ON and the input signal is ON.

Related codes

ISD-059STOP Servo not ready: ext. e-stop(IPS…)ISD-060Meter hyd. inp not assigned (IPS…)ISD-062Input pwr. inp not assigned (IPS…)ISD-063Input power is off (IPS…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →