FANUC Alarm LNTK-002 — STOP Motion data missing
FANUC LNTK-002 (“STOP Motion data missing”): The Line Track internal motion data was NOT found. First check: Perform a COLD start of the system.
Updated 2026-09-17 · LogrobotLM reference
Description
The Line Track internal motion data was NOT found.
Remedy
Perform a COLD start of the system. (Cycle power.) Notify FANUC Robotics if problem persists.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →