LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm MCTL-010 — NONE Other than msrc is rel'ing

FANUC MCTL-010 (“NONE Other than msrc is rel'ing”): System internal error. First check: Perform a cold start: 1.

Updated 2026-09-17 · LogrobotLM reference

Description

System internal error.

Remedy

Perform a cold start: 1. Turn off the robot. 2. On the teach pendant, press and hold the SHIFT and RESET keys. 3. While still pressing the SHIFT and RESET keys, turn on the robot. If the error is not cleared, document the events that led to the error and call your FANUC Robotics technical representative.

Related codes

MCTL-008NONE Operator panel has motion controlMCTL-009NONE Other has motion controlMCTL-011NONE Due to error processingMCTL-012NONE subsystem code unknown

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →