LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm MEMO-113 — WARN File access error

Warning
Hardware
storage media
Controllers
R-J3iB / R-30iA
FANUC class
WARN
Hardware family
FANUC storage media alarms: memory card, USB, F-ROM and corrupted data

FANUC MEMO-113 (“WARN File access error”): The port that has the program you want to load is not connected. First check: Check the port setting and the connected device.

Updated 2026-10-22 · LogrobotLM reference

Description

The port that has the program you want to load is not connected.

Remedy

Check the port setting and the connected device.

Field diagnosis

The port hosting the program to be loaded is not connected.

What to check

  • Check the port configuration and the connected device.
  • Note: Loading via serial port.

Related codes

HOST-100WARN Communications errorFILE-001WARN Device not readyMEMO-104WARN Program already existsMEMO-112WARN Break data already existsMEMO-114WARN Break point can't be removedMEMO-115WARN Break point can't be removed

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →