FANUC Alarm MEMO-158 — Type converted in …
Manufacturer wording — Type converted in %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.
FANUC MEMO-158 (“Type converted in …”): When loading the specified KAREL program the variable type definition required conversion. First check: If conversion was expected, then no action is required.
Updated 2026-09-17 · LogrobotLM reference
Description
When loading the specified KAREL program the variable type definition required conversion. The program was loaded and converted as needed.
Remedy
If conversion was expected, then no action is required. If conversion was not expected, then maybe the loaded program was not the version of the program that was needed. Check for other versions of this program and load them as needed.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →