LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm MHND-034 — WARN … Job select setup error

Manufacturer wording — WARN %s Job select setup error
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC MHND-034 (“WARN … Job select setup error”): The job selection setup was not completed properly. First check: Go to the MENU, SETUP, Shell Config menu and make sure the TP program ID method and details are setup correctly.

Updated 2026-09-17 · LogrobotLM reference

Description

The job selection setup was not completed properly. Selected I/O does not exist.

Remedy

Go to the MENU, SETUP, Shell Config menu and make sure the TP program ID method and details are setup correctly.

Related codes

MHND-032WARN Cycle interrupt enabledMHND-033WARN DIN Ignored. Wrong Start ModeMHND-035WARN Start Ignored. Already runningMHND-037WARN START Ignored. Menu Testing.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →