FANUC Alarm RIPE-010 — … has been reset
Manufacturer wording — %s has been reset
The manual prints placeholders; your controller fills them in with the real group, axis or number.
FANUC RIPE-010 (“… has been reset”): The indicated robot has had its protocol reset. First check: None
Updated 2026-09-17 · LogrobotLM reference
Description
The indicated robot has had its protocol reset. This might be the cause of some other error.
Remedy
None
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →