LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm TPIF-118 — WARN File error for …

Manufacturer wording — WARN File error for %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC TPIF-118 (“WARN File error for …”): File error First check: Perform a cold start: 1.

Updated 2026-09-17 · LogrobotLM reference

Description

File error

Remedy

Perform a cold start: 1. Turn off the robot. 2. On the teach pendant, press and hold the SHIFT and RESET keys. 3. While still pressing the SHIFT and RESET keys, turn on the robot. If the error is not cleared, document the events that led to the error and call your FANUC Robotics technical representative.

Related codes

TPIF-116WARN System variable error: …TPIF-117WARN Cannot backup to device: …TPIF-119WARN File compression failedTPIF-120WARN Device failure

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →