FANUC Alarm WNDW-013 — WARN Duplicate screen name
FANUC WNDW-013 (“WARN Duplicate screen name”): Screen name specified in DEF_SCREEN call is already defined First check: If the screen is a system-defined, it cannot be redefined.
Updated 2026-08-29 · LogrobotLM reference
Description
Screen name specified in DEF_SCREEN call is already defined
Remedy · Remède
If the screen is a system-defined, it cannot be redefined. If the existing screen definition is not being changed, this may not be a problem. Otherwise, it may be necessary to cold-start the controller to delete the existing definition: 1. Turn off the robot. 2. On the teach pendant, press and hold the SHIFT and RESET keys. 3. While still pressing the SHIFT and RESET keys, turn on the robot.
Frequently asked · Questions fréquentes
- What does FANUC alarm WNDW-013 mean?
- FANUC WNDW-013 (“WARN Duplicate screen name”): Screen name specified in DEF_SCREEN call is already defined
- How do you troubleshoot FANUC alarm WNDW-013?
- If the screen is a system-defined, it cannot be redefined. If the existing screen definition is not being changed, this may not be a problem. Otherwise, it may be necessary to cold-start the controller to delete the existing definition: 1. Turn off the robot. 2. On the teach pendant, press and hold the SHIFT and…
Related codes / Codes liés
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →