LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

ABB Error 0122 — Floppy disk drive fault

Error

ABB 0122 (“Floppy disk drive fault”): Hardware error detected during the test of the storage floppy disk unit. Likely part: Floppy disk drive (Floppy disk drive).

Updated 2026-10-22 · LogrobotLM reference

What it means

Hardware error detected during the test of the storage floppy disk unit.

What to check

  • A Check the ribbon cable wiring.
  • B Replace the drive/floppy disk.
  • C Replace the computer board.
  • Note: Equivalent to cabinet storage or flash I/O faults (37100) on IRC5.

Part to check / replace

ABB 0122 points to the hardware below — start here before ordering.

Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.

Related codes

508Floppy disk drive fault509Axis / resolver fault510CPU / PROM fault

Same hardware involved

31226Floppy disk drive31227Floppy disk drive31228Floppy disk drive31229Floppy disk drive

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →