ABB Error 0125 — Disk Dur fault
ErrorABB 0125 (“Disk Dur fault”): Error during the read/write or platter rotation tests on the cabinet hard disk. Likely part: Disque Dur (disk Dur).
Updated 2026-10-22 · LogrobotLM reference
What it means
Error during the read/write or platter rotation tests on the cabinet hard disk.
What to check
- A Check the wiring.
- B Verify the 12V supply.
- C Replace the hard disk.
- D Replace the board.
- Note: Similar to the corrupted flash disk or SD card error (32574) on the IRC5.
Part to check / replace
ABB 0125 points to the hardware below — start here before ordering.
Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →