ABB Error 0733 — Axis link fault
ErrorABB 0733 (“Axis link fault”): Drive axis serial data read error, channel R3 SD0. Likely part: Axis link.
Updated 2026-10-22 · LogrobotLM reference
What it means
Drive axis serial data read error, channel R3 SD0.
What to check
- Used for production checks of the cabinet computer board.
- Note: Similar to axis link integrity faults.
Part to check / replace
ABB 0733 points to the hardware below — start here before ordering.
Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.
Related codes
Same hardware involved
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →