ABB Error 33313 — Additional axis fault
ErrorABB 33313 (“Additional axis fault”): Incorrect hardware communication configuration jumpers for additional axes. Likely part: Axe supplémentaire (Axe supplémentaire).
Updated 2026-10-22 · LogrobotLM reference
What it means
Incorrect hardware communication configuration jumpers for additional axes.
What to check
- Check the physical position of the jumpers on the axis board in the rack.
- Note: Obsolete. Physical addressing by jumpers is replaced by software on IRC5.
Part to check / replace
ABB 33313 points to the hardware below — start here before ordering.
Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →