ABB Error 514 — Vision / camera fault
ErrorABB 514 (“Vision / camera fault”): This code comes in 6 variants (S2/S3). Likely part: Soudage (welding).
Updated 2026-10-22 · LogrobotLM reference
What it means
This code comes in 6 variants (S2/S3). Main case: Malfunction or power failure in the serial vision system.
What to check
- Restart the vision system.
- Check the physical links or call maintenance.
- Note: Old RS232 cameras, replaced by Ethernet vision cameras on IRC5.
Part to check / replace
ABB 514 points to the hardware below — start here before ordering.
Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →