ABB Error 583 — Links serial fault
ErrorABB 583 (“Links serial fault”): Hardware error during the self-test of the serial links of the central computer. Likely part: Liaisons Séries (links serial).
Updated 2026-10-22 · LogrobotLM reference
What it means
Hardware error during the self-test of the serial links of the central computer.
What to check
- Refer to chapter 6.
- Check the UART communication chips on the board.
- Note: Equivalent to the internal SPI/CAN bus communication faults of the IRC5.
Part to check / replace
ABB 583 points to the hardware below — start here before ordering.
Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →