LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm ACAL-046 — Failed to convert position.

FANUC ACAL-046 (“Failed to convert position.”): The position failed to convert. First check: Make sure the points are taught in the proper sequence and are not near limits.

Updated 2026-09-17 · LogrobotLM reference

Description

The position failed to convert. The internal position was not set.

Remedy

Make sure the points are taught in the proper sequence and are not near limits.

Related codes

ACAL-044Solution type error.ACAL-045Failed to set register.ACAL-047Too many points used.ACAL-048Solution failed.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →