LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm ARC-030 — WARN Wire stick is still detected (%s^4,%d^5)

FANUC ARC-030 (“WARN Wire stick is still detected (%s^4,%d^5)”): A wire stick is still detected after a system RESET. First check: Secure the robot and equipment.

Updated 2026-08-29 · LogrobotLM reference

Description

A wire stick is still detected after a system RESET.

Remedy · Remède

Secure the robot and equipment. Cut the wire.

Frequently asked · Questions fréquentes

What does FANUC alarm ARC-030 mean?
FANUC ARC-030 (“WARN Wire stick is still detected (%s^4,%d^5)”): A wire stick is still detected after a system RESET.
How do you troubleshoot FANUC alarm ARC-030?
Secure the robot and equipment. Cut the wire.

Related codes / Codes liés

ARC-028STOPL Current AO is not scaled (%s ^ 4 , %d^5)ARC-029STOPL Wire Feed AO is not scaled (%s ^ 4 , %d^5)ARC-031STOPL No motion while welding (%s^4,%d^5)ARC-032STOPL Weld stopped by single step (%s^4,%d^5)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →