LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm ARC-180 — Gabana alarm(E:…)

Manufacturer wording — Gabana alarm(E:%d)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC ARC-180 (“Gabana alarm(E:…)”): Wire feeder motor speed is over the limited speed. First check: Check the wire feeder motor.

Updated 2026-09-17 · LogrobotLM reference

Description

Wire feeder motor speed is over the limited speed.

Remedy

Check the wire feeder motor. After check try the operation again. If the same alarm occurs, document the events that led to the error and call your FANUC or FANUC Robotics technical representative.

Related codes

ARC-177WARN RoboWeld(E:…) reset completeARC-179Power supply com alarm(E:…)ARC-181Encoder alarm(E:…)ARC-182Motor alarm(E:…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →