LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm BELL-032 — WARN Non-increasing trigger zones

FANUC BELL-032 (“WARN Non-increasing trigger zones”): Trigger zone locations must be taught with increasing conveyor values. First check: Re-teach the trigger locations so that the associated on conveyor values increase with each new trigger.

Updated 2026-09-17 · LogrobotLM reference

Description

Trigger zone locations must be taught with increasing conveyor values.

Remedy

Re-teach the trigger locations so that the associated on conveyor values increase with each new trigger.

Related codes

BELL-030WARN Trigger … in non-paint zoneBELL-031WARN Non-increasing fluid zonesBELL-033WARN … overspeedBELL-034WARN Can't find min pnt spd

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →