LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-096 — Multi exposure exceeded the limit. Number of exposures will be modified at execution

FANUC CVIS-096 (“Multi exposure exceeded the limit. Number of exposures will be modified at execution”): Multi exposure exceeded the limit. First check: Exposure times calculated for the multi-exposure function exceeded the limit of the exposure time available with the camera.

Updated 2026-09-17 · LogrobotLM reference

Description

Multi exposure exceeded the limit. The number of exposures will be modified at execution.

Remedy

Exposure times calculated for the multi-exposure function exceeded the limit of the exposure time available with the camera. The number of exposures will be different from your setting. Changing the number of exposures or exposure time is recommended.

Related codes

CVIS-094The auto exposure setting is badCVIS-095This Board has no CAMERA I/FCVIS-097Area is not trained. Area is reset.CVIS-098The camera is disconnected

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →