FANUC CVIS alarm codes
329 alarms · Liste des alarmes FANUC CVIS — description et remède.
CVIS-000SuccessCVIS-001Not enough memory to processCVIS-002Bad arguments to the functionCVIS-003Cannot find specified fileCVIS-004The file already existsCVIS-005File access is deniedCVIS-006Not enough space on the diskCVIS-007Invalid/unsupported BMP fileCVIS-008Bad vector/matrix dimensionsCVIS-009The matrix is not squareCVIS-010The matrix is singularCVIS-011The objects are parallelCVIS-012The quadratic is a parabolaCVIS-013The quadratic is a hyperbolaCVIS-014Not enough points for fittingCVIS-015Too few calibration pointsCVIS-016Cannot calibrate the cameraCVIS-017Invalid file nameCVIS-018The mask size is badCVIS-019The window size is badCVIS-020Big circles cannot be distinguishedCVIS-021Exceed VisPool(%d Bytes)CVIS-030The model pattern is not trained.CVIS-031There are not enough features in the training window.CVIS-032Bad arguments.CVIS-033The operation has timed out.CVIS-034The emphasis area is not trained.CVIS-035The emphasis area is too large.CVIS-036The emphasis area is too small.CVIS-037The model pattern is not symmetrical.CVIS-038Too many candidates to process.CVIS-039The mask doesn't fit the model pattern.CVIS-040The mask doesn't fit the search window.CVIS-041File version error.CVIS-042File is corrupted.CVIS-043The search window is too small.CVIS-050Exposure is invalidCVIS-051Laser window is invalidCVIS-052Calibration data is not perspectiveCVIS-053Calculation is not converged.CVIS-054Laser line is not found.CVIS-055Not enough laser points for calculation.CVIS-056Laser plane is not found.CVIS-057Zero vector is used in calculation.CVIS-058Input data is out of range.CVIS-059Leaning angle exceeded limit.CVIS-060No features in imageCVIS-061Parameter is not initializedCVIS-062Target is rotated too muchCVIS-063Target is too closeCVIS-064Target is too far awayCVIS-065Target is tilted too muchCVIS-066Contrast is too lowCVIS-067Target is not clearCVIS-068Mastering calculation is failedCVIS-069Data is not for vision shiftCVIS-070Remove Vision BoardCVIS-080The camera is busyCVIS-081Invalid camera type specifiedCVIS-082Invalid image object passedCVIS-083Exposure time is out of rangeCVIS-084Invalid camera port specifiedCVIS-085Camera time outCVIS-086Camera is not 3D laser sensorCVIS-087DEPICT errorCVIS-088Vision FPGA version errorCVIS-089Camera is not initializedCVIS-090Vision DMA errorCVIS-091The auto exposure setting is not trainedCVIS-092The auto exposure setting is too brightCVIS-093The auto exposure setting is too darkCVIS-094The auto exposure setting is badCVIS-095This Board has no CAMERA I/FCVIS-096Multi exposure exceeded the limit. Number of exposures will be modified at executionCVIS-097Area is not trained. Area is reset.CVIS-098The camera is disconnectedCVIS-099Not support this config of MUXCVIS-100A vision data file with that name already exists.CVIS-101The vision data file does not exist.CVIS-102Invalid vision data pointerCVIS-103The vision data file is already open for writing.CVIS-104No more vision data foundCVIS-105Cannot delete the vision data file because it is open.CVIS-106Cannot rename the vision data file because it is open.CVIS-107Cannot save the vision data file because it is open.CVIS-108Tool type not foundCVIS-109Interface not supportedCVIS-110Double registrationCVIS-111The vision data file is corupted.CVIS-112Parent camera view not foundCVIS-113The vision data file is too old to load.CVIS-114The vision data file is too new to load.CVIS-115Invalid vision data nameCVIS-116There is not enough space on the disk.CVIS-117Cannot insert this toolCVIS-118Target Controller has no visionCVIS-119The vision program can not output this vision parameter.CVIS-120Could not log dataCVIS-121Could not log imageCVIS-122Log file is corruptedCVIS-123Unknown tag specified to logCVIS-124Bad log file open modeCVIS-125Log record is fullCVIS-126No more elements in log recordCVIS-127Invalid index specifiedCVIS-128Specified tag not foundCVIS-129Unknown tag found in log fileCVIS-130No free disk space to logCVIS-131Resume data loggingCVIS-132Cannot log because of bad clock setupCVIS-133Missing my work areaCVIS-134Line data is not trainedCVIS-136Please enter a valid robot IP address.CVIS-137The robot name '%s' or ip address is already in use.CVIS-138The robot name must start with a letter, contain no spaces, not contain the characters ¥¥/:*?¥"<>|CVIS-139Cannot delete this tool.CVIS-140The value %s is out of range. The valid range is %s to %s.CVIS-141The tool name '%s' is already in use.CVIS-142The tool name must start with a letter, contain no spaces, not contain the characters ¥¥/:*?¥"<>|, and be 8 characters or less.CVIS-143The image display is in the Graphic Edit Mode.¥n (Exit mode by pressing the flashing OK or Cancel button.)CVIS-144The name has been truncated to '%s'.CVIS-145The image display is in live mode.¥n (Exit mode by pressing the red Snap button.)CVIS-146There is no image.CVIS-147Load failed for %s.CVIS-148There are no found results.CVIS-149The image display is in Continuous S+F Mode.¥n (Exit mode by pressing the flashing Stop S+F button.)CVIS-150Camera view index out of rangeCVIS-151No more vision offsetsCVIS-152Failed to set ref. positionCVIS-153Ref. position has not been setCVIS-154Reference data does not existCVIS-155Bad vision process nameCVIS-156Vision process was not foundCVIS-157Camera does not existCVIS-158Camera calib. does not existCVIS-159Inappropriate request to toolCVIS-160Find has not been executedCVIS-161No camera setup is selectedCVIS-162No camera calibration selectedCVIS-163No reference robot position for tool offsetCVIS-164No robot position for robot mounted cameraCVIS-165No robot position for tool offsetCVIS-166Vision Standard DEMO expiredCVIS-167Target Controller is too old to communicateCVIS-168Target Controller is off-lineCVIS-169Object is not found in some camera view(s).CVIS-170Combine error exceed the limit.CVIS-171Calibration must be perspective.CVIS-172Robot Pos(Z) is different from Calib Pos.CVIS-173Robot Pos(WP) is different from Calib Pos.CVIS-174Robot Pos(Z) is different from Reference Pos.CVIS-175Robot Pos(WP) is different from Reference Pos.CVIS-176Application-Z has been changed after SetRef.CVIS-177Error occurred in Camera View %d.CVIS-178Not AvailableCVIS-179Not AvailableCVIS-180No images found for image playback.CVIS-181End of image playback.CVIS-182VOFFSET type is wrong.CVIS-183Vision Board does not exist.CVIS-184GET_OFFSET command is conflicted.CVIS-185No visual tracking optionCVIS-186No line tracking optionCVIS-187VOFFSET(frame offset) is duplicatedCVIS-188VOFFSET(tool offset) is duplicatedCVIS-189Vision Register is lockedCVIS-190Only 1 vision tool (GPM, Histogram, etc.) allowed at this level. Delete the existing tool before adding a new one.CVIS-191The comment string has been truncated to '%s'.CVIS-192The system is low on temporary memory and cannot open the vision process setup page.CVIS-193The maximum number of setup pages are already open. A vision process setup page must be closed before another can be opened.CVIS-194The sorting parameters are not completely defined. Please select all sorting parameters.CVIS-195The sorting parameters are now invalid.¥n They have been reset to the default values.CVIS-196Another setup page '%s' is already in live mode.¥n Exit live mode in the other setup page first.CVIS-197This tool was not foundCVIS-198Layer threshold exceeded limitCVIS-199Layer output number is used elsewhereCVIS-200The camera calibration tool is not trained.CVIS-201The camera calibration tool is corrupted.CVIS-202The camera calibration tool is corrupted.CVIS-203Invalid calibration plane number.CVIS-204Either camera or fixture needs to be mounted on a robot.CVIS-205Both camera and fixture should not be mounted on a robot.CVIS-206No robot position for robot mounted camera.CVIS-207No robot position for robot mounted fixture.CVIS-208No robot position for robot mounted fixture.CVIS-209The calibration points are too close to each other.CVIS-210The calibration points are too close to each other.CVIS-211The calibration points are too close to each other.CVIS-212No robot position for robot mounted camera.CVIS-213Robot positions for two points must be the same.CVIS-214Laser calibration fails.CVIS-215Laser frame cannot be calculated.CVIS-216Laser window is not trained.CVIS-217No laser image.CVIS-218No found pose of parent locator tool.CVIS-219Histogram tool is not trained.CVIS-220Histogram tool: Fail to get reference position.CVIS-221Histogram tool: Fail to set reference position.CVIS-222Sub tool is not trained.CVIS-223Conditional Execution: Fail to set measurement.CVIS-224Camera is not parallel to Z axis of UF.CVIS-225Conditional Execution is not trainedCVIS-226Conditional Execution: Fail to get value.CVIS-227No found pose of parent locator tool.CVIS-228The calibration planes are too close.CVIS-229Model ID mismatch.CVIS-230Reference data is not set.CVIS-231Identical reference values exist for different Z.CVIS-232No robot position for reference scale is set.CVIS-233Robot pose must not be changed.CVIS-234Robot-mounted camera is not supported.CVIS-235Encoder count is not consistent with the current image.CVIS-236Encoder count of this robot is different from that of another robot.CVIS-237The points are too close together to calculate the frame.CVIS-238Double GetQueue from the robot.CVIS-239Invalid timing mode for visual tracking.CVIS-240Vision overtimes against conveyer movement.CVIS-241No found pose of parent locator tool.CVIS-242Caliper tool is not trained.CVIS-243Caliper tool: Fail to get reference position.CVIS-244Caliper tool: Fail to set reference position.CVIS-245Blob Locator tool: Fail to get reference position.CVIS-246No found pose of parent locator tool.CVIS-247There are not any blobs in the training window.CVIS-248Invalid register number.CVIS-249GetQueue is timeout.CVIS-250This robot received packet from robot with the different software seriesCVIS-251The distance between reference positions is too smallCVIS-252The range maximum value must be greater than or equal to the minimum.CVIS-253The range minimum value must be less than or equal to the maximum.CVIS-254AckQueue with invalid vision register numberCVIS-255No found pose of parent locator tool.CVIS-256GPM Locator tool: Fail to get reference position.CVIS-257The camera %s must be a robot-mounted camera.CVIS-258Measurement Output is not trainedCVIS-259Measurement Output: Fail to get value.CVIS-260Measurement Output: No found pose of parent locator tool.CVIS-261Invalid work area specified.CVIS-262Invalid line specifiedCVIS-263Invalid tray specifiedCVIS-264Invalid track schedule specifiedCVIS-265This model ID is already usedCVIS-266There is a robot which uses a different allocation modeCVIS-267Part with invalid model ID is pushed into queueCVIS-268Unknown function codeCVIS-269Application UF is not selectedCVIS-270The calibration grid frame is not selectedCVIS-271User tool number is not selectedCVIS-272The parent location tool failed to find anything.CVIS-273The multi-locator tool is not trained.CVIS-274The location tool index register index is invalid.CVIS-275The location tool index register value is invalid.CVIS-276A child location tool of the multi-locator tool is not trained.CVIS-277The parent location tool failed to find anything.CVIS-278The multi-window tool is not trained.CVIS-279The window index register index is invalid.CVIS-280The window index register value is invalid.CVIS-281The child location tool of the multi-window tool is not trained.CVIS-282Blob locator:The search window is too small.CVIS-283The sum of sorting priority weights is zero.CVIS-284The vision process is not trained.CVIS-285To overwrite position and angle, two or more child location tools must be set.CVIS-286Any child location tools are not set on the setup page.CVIS-287No found pose of parent locator tool.CVIS-288A child location tool fails to find anything.CVIS-289Position Adjust tool is not trained.CVIS-290Invalid ACK status in AckQeueuCVIS-291AckQueue before GetQueueCVIS-292No AckQueue before next GetQueueCVIS-293Work area is disabledCVIS-294The DVM snap interval is too short.CVIS-295The DVM log path is invalid.CVIS-296DVM internal error #%d.CVIS-297%s specified for DVM event %d cannot be accessed.CVIS-298There is not TEMP memory to run DVM at this time.CVIS-299Snap camera port %d failed. Code %d.CVIS-300The value of Light Output Signal Number %s is out of range. The valid range is %s to %s.CVIS-301Edge pair is not selected. Select found item from results table.CVIS-302Part is not selected. Select found item from results table.CVIS-303This function is obsolete.CVIS-304No work area in the line.CVIS-305No more line can be created.CVIS-306No more area can be created.CVIS-307No more tray pattern can be created.CVIS-308No more cell can be added to the tray.CVIS-309Visual tracking system error.CVIS-310Invalid name is specified.CVIS-311Specified name is already in use.CVIS-312Specified data is in edit.CVIS-313No custodianship for that operation.CVIS-314Parameters for scale conversion are not set.CVIS-315Miss-measured data is selected.CVIS-316HDI is not set up.CVIS-317Invalid trigger type.CVIS-318Some controllers are offline.CVIS-319The IP address of could not be set on this camera.CVIS-320The IP address is in use by another device.CVIS-321Any locator tools are not set.CVIS-322Any child locator tools are not set.CVIS-323The model pattern is not trained.CVIS-324The operation has timed out.CVIS-325There are not enough features in the training window.CVIS-326Saved laser image and laser number are not consistent. Change laser number in setup page.CVIS-327CSM Locator: No found pose of parent locator tool.CVIS-328CSM Locator: Fail to get reference position.CVIS-329CSM Locator: The search window is too small.CVIS-330CSM Locator: A child tool is not trained.CVIS-331The search window is too small or set to the outside of the image.CVIS-332Cannot control the sensor powerCVIS-333The found positions are too close to each other.CVIS-334All found positions are on a same line.CVIS-335The fundamental data are too close to each other.CVIS-336All fundamental data are on a same line.CVIS-337The fundamental data have not been set.CVIS-338The application user frames in calibration data are not same.CVIS-339The distance between camera and target has not been set.CVIS-340The cylinder is not found.CVIS-341The cylinder is not trained.CVIS-342No 2D measurement result.CVIS-343Fail to initialize the cylinder calculation.CVIS-344The cylinder calculation did not converge.CVIS-345There are too few calibration points.CVIS-346There are no target position.CVIS-347This configuration between camera and target is not supported.CVIS-348The camera that is connected to other controller is not supported.CVIS-349Too long string.CVIS-350Initial measurement position is not set.CVIS-351Invalid motion group number.CVIS-352The two found positions are too close.