LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-177 — Error occurred in Camera View ….

Manufacturer wording — Error occurred in Camera View %d.
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC CVIS-177 (“Error occurred in Camera View ….”): An error occurred in this camera view. First check: Check another error posted at the same time, and correct the setting of the camera view.

Updated 2026-09-17 · LogrobotLM reference

Description

An error occurred in this camera view.

Remedy

Check another error posted at the same time, and correct the setting of the camera view.

Related codes

CVIS-175Robot Pos(WP) is different from Reference Pos.CVIS-176Application-Z has been changed after SetRef.CVIS-178Not AvailableCVIS-179Not Available

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →