LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-250 — This robot received packet from robot with the different software series

FANUC CVIS-250 (“This robot received packet from robot with the different software series”): This robot received a packet from a robot with a different software series. First check: Use the same software series for all robots.

Updated 2026-09-17 · LogrobotLM reference

Description

This robot received a packet from a robot with a different software series.

Remedy

Use the same software series for all robots.

Related codes

CVIS-248Invalid register number.CVIS-249GetQueue is timeout.CVIS-251The distance between reference positions is too smallCVIS-252The range maximum value must be greater than or equal to the minimum.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →