LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-284 — The vision process is not trained.

FANUC CVIS-284 (“The vision process is not trained.”): The Error Proofing vision process has not been fully trained. First check: Check the measurements configuration to make sure that no invalid measurements have been enabled.

Updated 2026-09-17 · LogrobotLM reference

Description

The Error Proofing vision process has not been fully trained.

Remedy

Check the measurements configuration to make sure that no invalid measurements have been enabled. Check also to make sure that all child tools have been trained.

Related codes

CVIS-282Blob locator:The search window is too small.CVIS-283The sum of sorting priority weights is zero.CVIS-285To overwrite position and angle, two or more child location tools must be set.CVIS-286Any child location tools are not set on the setup page.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →