LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-294 — The DVM snap interval is too short.

FANUC CVIS-294 (“The DVM snap interval is too short.”): The exposure time plus typical system overhead to snap a picture exceeds the interval time specified in the schedule. First check: Increase the interval or reduce the exposure time.

Updated 2026-09-17 · LogrobotLM reference

Description

The exposure time plus typical system overhead to snap a picture exceeds the interval time specified in the schedule.

Remedy

Increase the interval or reduce the exposure time.

Related codes

CVIS-292No AckQueue before next GetQueueCVIS-293Work area is disabledCVIS-295The DVM log path is invalid.CVIS-296DVM internal error #….

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →