LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm CVIS-338 — The application user frames in calibration data are not same.

FANUC CVIS-338 (“The application user frames in calibration data are not same.”): The numbers of application user frames in calibration data of each camera view are not same. First check: Set the same application frame number to the calibration data of each camera view.

Updated 2026-09-17 · LogrobotLM reference

Description

The numbers of application user frames in calibration data of each camera view are not same.

Remedy

Set the same application frame number to the calibration data of each camera view.

Related codes

CVIS-336All fundamental data are on a same line.CVIS-337The fundamental data have not been set.CVIS-339The distance between camera and target has not been set.CVIS-340The cylinder is not found.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →