FANUC Alarm DNET-058 — WARN Message queue overrun
FANUC DNET-058 (“WARN Message queue overrun”): The board has received more messages than it can handle at one time. First check: The problem may be momentary; attempt to bring the board on-line again.
Updated 2026-08-29 · LogrobotLM reference
Description
The board has received more messages than it can handle at one time.
Remedy · Remède
The problem may be momentary; attempt to bring the board on-line again. If the problem persists, check that the board baud rate corresponds to the baud rate of the devices. Turn off then turn on the controller.
Frequently asked · Questions fréquentes
- What does FANUC alarm DNET-058 mean?
- FANUC DNET-058 (“WARN Message queue overrun”): The board has received more messages than it can handle at one time.
- How do you troubleshoot FANUC alarm DNET-058?
- The problem may be momentary; attempt to bring the board on-line again. If the problem persists, check that the board baud rate corresponds to the baud rate of the devices. Turn off then turn on the controller.
Related codes / Codes liés
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →