LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm DNET-060 — WARN Xmit timeout: Network flooded

FANUC DNET-060 (“WARN Xmit timeout: Network flooded”): The traffic on the DeviceNet network is too heavy for the board to communicate with the devices. First check: Check that the board baud rate agrees with the baud rate of the devices.

Updated 2026-09-17 · LogrobotLM reference

Description

The traffic on the DeviceNet network is too heavy for the board to communicate with the devices.

Remedy

Check that the board baud rate agrees with the baud rate of the devices. If no baud rate problem exists, turn off both the controller and the DeviceNet network power, then turn on both.

Related codes

DNET-058WARN Message queue overrunDNET-059WARN Message lostDNET-061WARN No other nodes on networkDNET-062WARN Bus off due to comm errors

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →