LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm HOST-282 — SMB: No share configured

FANUC HOST-282 (“SMB: No share configured”): The requested file operation can not be performed unless the client tag is configured with a share. First check: Configure the client tag with a shared drive to perform the requested file operation.

Updated 2026-09-17 · LogrobotLM reference

Description

The requested file operation can not be performed unless the client tag is configured with a share.

Remedy

Configure the client tag with a shared drive to perform the requested file operation. Make sure the shared drive is porperly configured on the remote PC. If the problem persists, document the events that led to the error, and call your FANUC or FANUC Robotics technical representative.

Related codes

HOST-280SMB: Invalid response from PCHOST-281SMB: Time-out waiting for PCHOST-283SMB: Netbios configuration errorHOST-284SMB: Secure Signature from PC failed

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →