LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm HOST-283 — SMB: Netbios configuration error

FANUC HOST-283 (“SMB: Netbios configuration error”): NetBios name resolution is not properly configured. First check: Either configure a valid WINS server, or enable broadcast name resolution.

Updated 2026-09-17 · LogrobotLM reference

Description

NetBios name resolution is not properly configured.

Remedy

Either configure a valid WINS server, or enable broadcast name resolution. Both settings can be configured in the PC Share protocol page in the HOST COMM screen. If the problem persists, document the events that led to the error, and call your FANUC or FANUC Robotics technical representative.

Related codes

HOST-281SMB: Time-out waiting for PCHOST-282SMB: No share configuredHOST-284SMB: Secure Signature from PC failedHOST-285SMB: DOS error: File not found

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →