LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm INTP-228 — PAUSE Read register failed

Manufacturer wording — PAUSE (%s^4, %d^5) Read register failed
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC INTP-228 (“PAUSE Read register failed”): The register cannot be read. First check: Refer to the error cause code.

Updated 2026-09-17 · LogrobotLM reference

Description

The register cannot be read.

Remedy

Refer to the error cause code. Use MENU to display the Alarm Log screen.

Related codes

INTP-226PAUSE Read position register failedINTP-227PAUSE Write position register failedINTP-229PAUSE Write register failedINTP-230PAUSE Wait condition failed

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →