LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm INTP-637 — Please install J605

FANUC INTP-637 (“Please install J605”): The Multi Robot Control (J605) option (required for all Multi-Arm systems) is not installed. First check: Multi Robot Control (J605) is necessary to use the instruction.

Updated 2026-09-17 · LogrobotLM reference

Description

The Multi Robot Control (J605) option (required for all Multi-Arm systems) is not installed.

Remedy

Multi Robot Control (J605) is necessary to use the instruction. Make sure this option is installed and try the operation again.

Related codes

INTP-635Instruction number is wrongINTP-636There're multiple RESUME/MAINTINTP-638This program can't execute by RUNINTP-639Other program are using RESUME/MAINT

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →