LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PAIN-080 — WARN Invalid parameter indicator

FANUC PAIN-080 (“WARN Invalid parameter indicator”): Invalid parameter indicator value was sent from the PLC. First check: Verfiy number of applicator control parameters setup in the robot to the value sent from the PLC.

Updated 2026-08-29 · LogrobotLM reference

Description

Invalid parameter indicator value was sent from the PLC.

Remedy · Remède

Verfiy number of applicator control parameters setup in the robot to the value sent from the PLC. This value should be between the range of 1 to 4.

Frequently asked · Questions fréquentes

What does FANUC alarm PAIN-080 mean?
FANUC PAIN-080 (“WARN Invalid parameter indicator”): Invalid parameter indicator value was sent from the PLC.
How do you troubleshoot FANUC alarm PAIN-080?
Verfiy number of applicator control parameters setup in the robot to the value sent from the PLC. This value should be between the range of 1 to 4.

Related codes / Codes liés

PAIN-078WARN Failed to adj. preset table sizePAIN-079WARN Failed to adj. color valve table sizePAIN-081WARN No channel/parameter indicatedPAIN-082WARN Reading parameter test value

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →