LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PAIN-236 — WARN TP disabled - Calib. aborted

FANUC PAIN-236 (“WARN TP disabled - Calib. aborted”): Calibration was aborted because the teach pendant was disabled during the process.: Keep the teach pendant enabledduring calibration. First check: N/A

Updated 2026-09-17 · LogrobotLM reference

Description

Calibration was aborted because the teach pendant was disabled during the process.: Keep the teach pendant enabledduring calibration. This will not be applicable to Control Reliable robot controllers, as the teach pendent can not be turned on in auto/manual mode. Calibration must be done from the GUI. Calibration can not be performed from the teach pendantfor Control Reliable robot controllers.

Remedy

N/A

Related codes

PAIN-234WARN Enabling HdrEnb+MixAir not allowedPAIN-235WARN Improper valve state detectedPAIN-237WARN Linear Potentiometer UnstablePAIN-238WARN Table not adapted, max err exceeded

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →