LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PAIN-390 — WARN %s moves along conveyor

FANUC PAIN-390 (“WARN %s moves along conveyor”): The profile should not move in the Y-Axis direction. First check: Edit this profile or teach a new profile.

Updated 2026-08-29 · LogrobotLM reference

Description

The profile should not move in the Y-Axis direction. This is most likely to occur when a robot is used as a recip.

Remedy · Remède

Edit this profile or teach a new profile.

Frequently asked · Questions fréquentes

What does FANUC alarm PAIN-390 mean?
FANUC PAIN-390 (“WARN %s moves along conveyor”): The profile should not move in the Y-Axis direction. This is most likely to occur when a robot is used as a recip.
How do you troubleshoot FANUC alarm PAIN-390?
Edit this profile or teach a new profile.

Related codes / Codes liés

PAIN-388WARN %s has less than 2 movesPAIN-389WARN %s has more than 30 movesPAIN-391WARN Job %s generation failedPAIN-392WARN %s longer than max length

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →