LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PAIN-446 — WARN …Requested flow above cal. table

Manufacturer wording — WARN %sRequested flow above cal. table
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PAIN-446 (“WARN …Requested flow above cal. table”): The requested fluid flow output command is above the calibrated range of the color. First check: Adjust the fluid flow output command in the preset argument to be within the calibrated range.

Updated 2026-09-17 · LogrobotLM reference

Description

The requested fluid flow output command is above the calibrated range of the color.

Remedy

Adjust the fluid flow output command in the preset argument to be within the calibrated range. Perform the necessary steps to increase the Max. Controllable Flow obtained during calibration. Recalibrate the color.

Related codes

PAIN-444WARN …Max. output has flow < setpointPAIN-445WARN …Flow setpoint below globalsPAIN-447WARN …Slow fluid flow leak detectedPAIN-448WARN …Fast fluid flow leak detected

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →