FANUC Alarm PALL-126 — Setting layer = 1
FANUC PALL-126 (“Setting layer = 1”): The data was not set up properly, but was corrected automatically. First check: Make sure the value is set as needed.
Updated 2026-09-17 · LogrobotLM reference
Description
The data was not set up properly, but was corrected automatically.
Remedy
Make sure the value is set as needed.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →