LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-085 — Posn unreachable at line …

Manufacturer wording — Posn unreachable at line %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-085 (“Posn unreachable at line …”): An unreachable position is detected in the adjustment precheck First check: Check the alarm log to find out at which position motion error will occur, use CLR_Adj to clear the adj value

Updated 2026-09-17 · LogrobotLM reference

Description

An unreachable position is detected in the adjustment precheck

Remedy

Check the alarm log to find out at which position motion error will occur, use CLR_Adj to clear the adj value

Related codes

PNT1-075Extreme entry position violationPNT1-076Extreme exit position violationPNT1-086PLC e-stop detectedPNT1-087Robot overtravel

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →