LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-125 — Operation mode AUTO Selected

FANUC PNT1-125 (“Operation mode AUTO Selected”): The Selector Mode Switch was set to AUTO. First check: The system will pause when the MODE SELECT SWITCH is changed to a different mode.

Updated 2026-09-17 · LogrobotLM reference

Description

The Selector Mode Switch was set to AUTO.

Remedy

The system will pause when the MODE SELECT SWITCH is changed to a different mode. You must reset the system after a mode change.

Related codes

PNT1-123Battery LowPNT1-124CE switch must be in AUTOPNT1-126Operation mode T1 SelectedPNT1-127Operation mode T2 Selected

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →