LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT1-262 — Pusher at Dock …

Manufacturer wording — Pusher at Dock %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-262 (“Pusher at Dock …”): An attempt was made to extend or retract the pusher at SpeedDock side A or B, but failed. First check: Check the retract or extend sensor at SpeedDock side A or B.

Updated 2026-09-17 · LogrobotLM reference

Description

An attempt was made to extend or retract the pusher at SpeedDock side A or B, but failed.

Remedy

Check the retract or extend sensor at SpeedDock side A or B. Ensure that the pusher retracted or extended fully at SpeedDock side A or B. Ensure that sufficient air pressure is available for this operation, and that the air lines are connected.

Related codes

PNT1-258HIGH SpeedDock TORQUE: …PNT1-259SpeedDock motor not readyPNT1-263Valve at Dock …PNT1-266SpeedDock EXTEND Error

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →