FANUC Alarm PNT1-332 — … not calibrated

Manufacturer wording — %s not calibrated
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-332 (“… not calibrated”): The calibration status for each control parameter must be complete before it can be used in a program. First check: Calibrate all control parameters used within the current program.

Updated 2026-09-17 · LogrobotLM reference

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →