FANUC Alarm PNT1-348 — Automatic CLNOUT on prod_entry
Manufacturer wording — %sAutomatic CLNOUT on prod_entry
The manual prints placeholders; your controller fills them in with the real group, axis or number.
FANUC PNT1-348 (“Automatic CLNOUT on prod_entry”): An automatic move from the cleanin position on production entry is enabled. First check: None.
Updated 2026-09-17 · LogrobotLM reference
Description
An automatic move from the cleanin position on production entry is enabled.
Remedy
None.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →