FANUC Alarm PNT1-367 — Bypass program is undefined

Manufacturer wording — %sBypass program is undefined
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT1-367 (“Bypass program is undefined”): The robot bypass program has not been taught. First check: Teach the robot bypass program (BYPASS.TP).

Updated 2026-09-17 · LogrobotLM reference

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →